DFU / USB boot patch and Dunfell

Devices osd32mp15x
1

Somehow a post I submitted last week didn’t get through or is stuck in moderation.

To flash an eMMC, the preferred way is to use DFU over USB. On out custom board, the flashing gets stuck in a loop and then fails.

This patch is required for the BRK board for images based on Dunfell. Is it also needed for custom boards?

https://github.com/octavosystems/meta-octavo-osd32mp1/blob/dunfell/recipes-bsp/u-boot/files/0007-Add-OSD32MP1-BRK-build-config.patch

which seems to be based on this earlier version:

https://github.com/neerajdantu/BRK_Uboot_patch

Thanks, Carlos